Alpine R-S69C.2 Component System 600W Peak, 200W RMS R-Series 6x9" Component 2-Way Speakers
FOR LIVING LOUD AND HAVING FUN
If you play your music loud and want others to know, the R-Series speakers are the match for you. You will enjoy a center sound stage with speakers that play loud and clear without distortion. The R-Series speakers are tuned with an emphasis on the high- and low-end frequencies, so they deliver power while naturally producing bright, active sound. They are the perfect power and performance match for the R-Series subwoofers and amplifiers.
MORE OUTPUT FOR MORE FUN
The woofers have a large, 35-millimeter (mm) voice coil which allows for more coil windings to fit in the gap. This results in greater heat dissipation and increased power handling, for superior control and output.
The R-Series speakers incorporate Alpines patented High-Amplitude Multi-Roll Surround (H.A.M.R.) for control and accuracy. The component models use a crossover with in-line, passive design, and reduced footprint, which contributes to easier installation.
EXCLUSIVE CONE TECHNOLOGY
The R-Series speakers use Alpines exclusive cone technology, Carbon Fiber Reinforced Polymer (CFRP), which is a high-strength, lightweight material. CFRP can be custom formed so that its fibers align in the same direction as the curve and shape of the cone, thereby reducing resonant peaks and increasing the speakers mid-bass performance and dynamic range. CFRP is also used as a tweeter diaphragm, enabling the speakers to perform into the 45kHz range and making them compliant with High-Resolution Audio playback.
BETTER FITMENT WITHOUT SACRIFICING MOTOR FORCE
The R-Series speakers use a neodymium magnet which gives them a shorter overall height, compared to other speaker brands. The R-Series speakers also use a new, shallower grill design. The result: An improved fitment design that lets the R-Series speakers fit into tighter install locations without sacrificing motor force.
Product Details:
- Alpine R-S69C.2
- Alpine R-Series 6"x9" 2-Way Component Car Speakers (Pair)
- Power Handling:
- RMS: 100 Watts
- Peak: 300 Watts
- Impedance: 4 Ohms
- Carbon-fiber reinforced polymer (CFRP) woofer
- Carbon-fiber reinforced polymer dome tweeter
- Frequency response: 60Hz - 40 kHz
- Sensitivity: 90 dB
- Top-mount depth: 2-7/8"
- Grilles included
- Authorized Dealer
- 1-year Manufacturers Warranty
What is in the R-S69C.2 package:
- 2 Woofers
- 2 Woofer grilles
- 2 Grille badges
- 2 Tweeters (each has an attached 30" length of wire)
- 2 Tweeter grilles (installed)
- 2 Swivel flush mount housings (with tweeters installed)
- Two crossovers (each has attached input and output wires)
- 2 Flush mount retention rings
- 2 Stealth brackets
- 2 Foam self-adhesive pads
- 2 Foam self-adhesive rings
- Eight 1-1/8" Screws
- 8 Speed-clips
- Eight M4x60mm Machine screws
- 8 Nuts
- 8 Flat washers
- 8 Split lock washers
- Four 5" Zip ties
- 2 Pieces of two-sided tape
- Warranty information
- Online product registration notes
- Important Notice sheet
- Template and specs on the box
- R-S69C.2 Owners Manual
⚠️Warning:
Cancer and Reproductive Harm-www.P65Warnings.ca.gov
